Flash Official Firmware Samsung Galaxy S8 & S8 Plus And Revert To Stock

Underneath We’ll Get Into A Portion Of Arrangements On How To Flash Official Firmware Samsung Galaxy S8 & S8 Plus And Revert To Stock:

The Samsung Galaxy S8 smartphone was propelled in March 2017. The phone accompanies a 5.80-inch touchscreen with a display resolution of 1440 pixels by 2960 pixels at a PPI of 570 pixels for each inch.

The Samsung Galaxy S8 runs on a 1.9GHz octa-center Samsung Exynos 8895 processor and it accompanies 4GB of RAM. The smartphone packs 64GB of internal storage that can be extended up to 256GB by means of a microSD card. Where camera specs are concerned, the Samsung Galaxy S8 packs a 12-megapixel rear camera (primary) and on the front a 8-megapixel front shooter for selfies.

The Samsung Galaxy S8 runs Android 7.0 which can also be upgraded to the latest available running Android OS and runs on a 3000mAh non removable battery. It’s metrics are 148.90 x 68.10 x 8.00 (tallness x width x thickness) and weighs roughly about 155.00 grams.

The Samsung Galaxy S8 is a single SIM operable smartphone (GSM). Connection alternatives incorporate Wi-Fi, GPS, Bluetooth, NFC, 3G and 4G. Sensors on the smartphone incorporate Compass Magnetometer, Proximity sensor, Accelerometer, Ambient light sensor and Gyroscope.

How To Flash Official Firmware on Samsung Galaxy S8 & S8 Plus And Revert To Stock


Instructions to Revert Galaxy S8 and S8 Plus To Stock By Flashing Official Firmware

We don’t assume liability if something turns out badly with your smartphone. If you don’t mind, continue at your own particular hazard.

Download files

Odin for Galaxy S8 (Download)

Stock firmware for S8 and S8+ (Download)

Also go ahead and Download Samsung Galaxy S8 USB Drivers from Samsung’s Official Website. 


Go to the firmware download page, and enter your phone’s model number. On the off chance that you don’t have any acquaintance with it, go to Settings > About Phone > Model Number. You can download different versions for Exynos and Snapdragon variations of The Samsung Galaxy S8 and S8 Plus.

Shut off or Kill your smartphone. Press and hold the volume down, Bixby and power buttons in the meantime to go into download mode.

Interface/link or connect your smartphone to your PC utilizing the included USB link.

Download Odin and launch the application. Dispatch or start the downloaded program.

In the event that the firmware you downloaded is in a compressed document, unzip it. You will get a tar.md5 record.

On Odin, tap on AP and select the recently downloaded stock firmware.

Tap on the begin key.

This will initiate the installation procedure of the stock firmware. Once the procedure is finished, the smartphone will naturally reboot. Your Samsung Galaxy S8 or S8 Plus will now be back to stock.


Experiencing difficulties with your Android Device, check out our “How To” page on how to resolve some of these issues.

Other Android Technical Reviews:-  Android


  1. Great site, thank you. I have been bequeathed a Samsung S8 which is most probably network locked. It has been flashed with a custom ROM and I need to flash with stock ROM. I want to change carrier – will the flashing unlock the phone? If not will I need to install stock firmware for the original carrier (Telstra I think) – unlock – and then install firmware for preferred carrier?
    Hope this makes sense.


Please enter your comment!
Please enter your name here