Underneath we’ll get into a portion of the arrangements on How To Treat LG G5 Fell In Water.
The LG G5 is an Android smartphone developed by LG Electronics as part of the LG G series. It was announced during Mobile World Congress as the successor to the 2015 LG G4. The G5 is distinguished from its predecessors by its aluminum chassis and a focus on modularity; the lower housing which contains the battery can be slid from the bottom of the device, and replaced by alternative add-on modules that provide additional functions, such as a camera grip or a high-fidelity audio module with DAC. A lower-spec variation, dubbed the LG G5 SE, is sold in selected markets.
The G5 is constructed with an aluminum unibody chassis; a “micro-dizing” process utilizing a plastic primer was used to conceal seams required for the antenna. A rounded rectangular protrusion houses the camera components, and the bottom houses a USB-C connector. Unlike previous G models, the G5’s volume buttons were re-located from the back of the device to its side bezel, but the circular power button—which now also contains a fingerprint reader—remains on the rear.
The LG G5 is bundled with Android 6.0 “Marshmallow”. Citing confusion between removing shortcuts to apps and uninstalling them entirely, the G5’s home screen does not feature an “app drawer”, and instead places all apps on pages of the main home screen similarly to iOS. However, there is a setting to enable the app drawer on the home screen.
In November 2016, LG released an upgrade to Android 7.0 “Nougat”.
How To Treat LG G5 Fell In Water
There might be instances at when your phone may fell into water and this is a serious issue. For primary care you can do the following things below:-
The water minerals will cause corrosion and the water being a good conductor provides circuit paths for the electricity which could damage the components.
Firstly do not turn switch on your LG smartphone is it is off, remove the battery as soon as possible from the phone to reduce the possibility of further damage.
Then you need to dis-assemble the rest of the smartphone and clean all the affected parts using Isopropyl Alcohol 90%+ to remove all traces of corrosion and water. Refrain from using “rubbing alcohol” as in some cases this is only 70% strength and is not as effective. You can verify the amount by checking the label on the alcohol.
You may have to replace the battery as it is very hard to recover a battery from water damage.
Be cautious, careful and gentle when handling and especially brushing away the corrosion. You do not want to remove any components from the board.
Here is a guide on iFixit detailing the process to repair various problems for the LG G5.
You can leave it in a bag of ziplock rice for about two to three days.
- Switch off the phone
At first power off the phone so that the internal hardware of the phone is not harmed. This can save the phone from being short circuit and burning.
- Remove water
Remove the water from the entire phone parts. Keep it at a dry and sunny place to dry the phone completely. For this you can use a silica gel or a dryer to get the phone dried faster.
Theses are the primary things that you can do. After following the above methods try to switch on your LG G5 smart phone. If it does not power on great, immediately contact a technical support specialist.
Experiencing difficulties with your Android Device, check out our “How To” page on how to resolve some of these issues.
Other Android Technical Reviews:- Android