Are you looking to install the unofficial Android 14 Custom ROM on your Samsung Galaxy F62? If so, you’ve come to the right place. In this comprehensive guide, we’ll walk you through the process of installing the pure version of Android 14 on your Galaxy F62. Before we dive into the installation steps, let’s take a closer look at the Samsung Galaxy F62 and the exciting features of Android 14.

Samsung Galaxy F62 Overview

The Samsung Galaxy F62 is equipped with a 6.7-inch Super AMOLED display that boasts a resolution of 1080 x 2400 pixels and an aspect ratio of 20:9. Powering the device is the Exynos 9825, an octa-core processor that provides excellent performance. The processor consists of two Exynos M4 cores clocked at 2.73 GHz, two Cortex-A75 cores clocked at 2.40 GHz, and four Cortex-A55 cores clocked at 1.95 GHz.

When it comes to photography, the Galaxy F62 doesn’t disappoint. It features a quad-camera setup on the rear, including a 64MP primary sensor with an f/1.8 lens, a 12MP ultrawide sensor with an f/2.2 lens, a 5MP macro sensor with an f/2.4 lens, and a 5MP depth sensor with an f/2.4 lens. On the front, there’s a single 32MP selfie camera with an f/2.0 lens. Both the front and rear cameras are capable of recording 4K videos.

The smartphone runs on Android 11 with Samsung’s One UI 3.1 skin on top. It offers two storage options: 6GB RAM + 128GB storage and 8GB RAM + 128GB storage. Additionally, there’s a microSD card slot for storage expansion. In terms of connectivity, the Galaxy F62 supports Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, GPS, NFC, FM radio, and USB Type-C 2.0.

Other notable features of the Samsung Galaxy F62 include a side-mounted fingerprint sensor, accelerometer, gyro, proximity sensor, and compass. The device is powered by a massive 7,000 mAh battery that supports 25W fast charging. It comes in three color options: Laser Green, Laser Gray, and Laser Blue. The base variant of the Galaxy F62 starts at 23,999 INR, while the higher variant is priced at 25,999 INR.

Android 14 and Its Features

Android 14, the fourteenth major iteration of Google’s renowned operating system, was unveiled on October 4. The Pixel 8 and Pixel 8 Pro were the first devices to receive this latest Android version, showcasing Google’s commitment to keeping its flagship devices at the forefront of technology.

Android 14 introduces a wide range of enhancements and innovative features. Notable additions include a revamped lock screen, an improved system share sheet for easier sharing, and a redesigned battery-saving mode to maximize device performance. Users can also enjoy the convenience of drag-and-drop capabilities during app switches, Ultra HDR support for media, and visually striking Material You-themed settings toggles. With AI-generated wallpapers and a new monochromatic theme, Android 14 not only enhances functionality but also provides a refreshing aesthetic experience.

What’s Working and Known Bugs

Before proceeding with the installation, it’s essential to be aware of what’s working and any known bugs in the AOSP Android 14 ROM for the Samsung Galaxy F62. Here’s a quick overview:

What’s Working:

  • Wi-Fi
  • RIL
  • VoLTE
  • Mobile data
  • GPS
  • Camera
  • Flashlight
  • Camcorder
  • Bluetooth
  • Fingerprint sensor
  • FM radio
  • Sound
  • Vibration

Known Issues:

  • Hotspot may lag when trying to turn it off

Now that you have an understanding of the Samsung Galaxy F62 and Android 14, let’s move on to the step-by-step guide to installing AOSP Android 14 on your device.

How to Install AOSP Android 14 on Galaxy F62

To install the AOSP Android 14 build on your Samsung Galaxy F62, follow the step-by-step instructions provided below. Before you begin, make sure you meet all the prerequisites mentioned in the pre-requisites section.


Before diving into the installation process, it’s crucial to complete the following pre-requisites:

Charge Your Phone

Before unlocking the bootloader and installing the custom ROM, ensure that your Samsung Galaxy F62 is adequately charged. It’s recommended to have at least 50% battery to prevent any interruptions during the installation process.

Download ADB and Fastboot Binaries

If you haven’t already installed TWRP Recovery on your Galaxy F62, you’ll need to download and install ADB and Fastboot binaries. These tools allow you to boot your device into the bootloader mode, making it easier to proceed with the installation steps. You can download ADB and Fastboot binaries from here.

Download Samsung USB Drivers

To establish a strong and successful connection between your Galaxy F62 and your computer, you’ll need to download Samsung USB drivers. These drivers enable you to transfer files, flash firmware, and perform other tasks between your device and your computer.

Unlock the Bootloader of Your Phone

Before you can install custom ROMs on your Samsung Galaxy F62, you need to unlock the device’s bootloader. Unlocking the bootloader allows you to make modifications to the system partition.

Install TWRP Recovery

To install a custom ROM on your Samsung Galaxy F62, you must have TWRP (Team Win Recovery Project) Recovery installed on your device.

Download Android 14 ROM

Download the Android 14 custom ROM for your Samsung Galaxy F62 from reliable sources. You can find various ROMs, such as Lineage OS 21 and Pixel Experience ROM, which offer the Android 14 experience on your device. Visit the respective XDA Development pages for each ROM to download the files.

Download Android 14 GApps

Most custom ROMs, including AOSP-based ROMs, do not come with Google apps preinstalled. If you want to use Google apps on your Galaxy F62 with Android 14, you’ll need to download and flash GApps (Google Apps) separately. You can find the appropriate Android 14 GApps package for your device and ROM version.

Now that you have completed the pre-requisites, let’s proceed with the installation steps.

Instructions To Install

Follow these instructions carefully to install AOSP Android 14 on your Samsung Galaxy F62:

  1. Connect your Galaxy F62 to your computer using a USB cable. Ensure that USB Debugging is enabled on your device. If you’re prompted to allow USB debugging, grant the permission.
  2. Open the folder where you downloaded the ADB and Fastboot binaries. In the address bar, type “CMD” and press Enter. This will launch the Command Prompt.
  3. In the Command Prompt window, enter the following command to boot your device into TWRP Recovery:
   adb reboot recovery
  1. Your Galaxy F62 will now boot into TWRP Recovery. Once you’re in TWRP, navigate to the “Install” section.
  2. In the Install section, locate the downloaded vendor and firmware files and select them. Perform a right swipe to flash the files onto your device.
  3. If you want to install Google Apps as well, go back to the Install section and select the GApps ZIP file. Perform a right swipe to flash the GApps onto your device.
  4. Once the flashing process is complete, go to the “Reboot” section in TWRP.
  5. Select “System” to reboot your Samsung Galaxy F62.
  6. Your device will now boot with the newly installed AOSP Android 14 ROM. The first boot may take some time, so be patient.

Congratulations! You have successfully installed AOSP Android 14 on your Samsung Galaxy F62. Please note that the initial boot may take longer than usual, and you may need to set up your device from scratch.


If you’re eager to experience the latest version of Android on your Samsung Galaxy F62, installing the AOSP Android 14 ROM is a great option. While the official Android 14 update may not be available for the Galaxy F62, the custom ROM provides most of the features and visual enhancements of Android 14. If you encounter any bugs or stability issues, make sure to report them to the respective forum for assistance.

We hope this step-by-step guide has been helpful to you. If you have any further queries or need additional assistance, feel free to leave a comment below. Happy flashing!


Please enter your comment!
Please enter your name here