The 2019 action-adventure title Star Wars Jedi: Fallen Order was created by Respawn Entertainment and released by Electronic Arts. The story takes place five years after Star Wars: Episode III – Revenge of the Sith in the Star Wars galaxy. The story revolves around Jedi Padawan Cal Kestis, who fights to complete his training, find closure with his troubled past and rebuild the disbanded Jedi Order while becoming a target of the Galactic Empire and being sought out by Imperial Inquisitors across the galaxy. Stormtroopers, wild animals and bounty hunters can all be defeated using Kestis’ lightsaber and Force abilities. Cal can access new areas as he gains new skills and abilities thanks to the Metroidvania-style level design used in the game.
Not everyone will have the necessary hardware to run the game at it’s highest resolution and frame rate, so the game should have a sufficient amount of hardware setup to work properly, especially on a PC. Given how resource-intensive the majority of PC games are, it occurs frequently. To resolve the Star Wars Jedi Fallen Order stuttering, lags and freezing issues, follow the instructions provided here.
Unfortunately, some Star Wars Jedi Fallen Order PC players are encountering various problems during the gameplay, including stuttering, lags, crashes, frame drops, etc. It might be a serious issue depending on the PC in question and the compatibility issue. It is, therefore, always preferable to find a solution to the issue so that you can at least play the game with a respectable FPS level. Several factors cause this problem, but it can be fixed by following this guide.
System Requirements
You should first verify that your PC meets the listed requirements. These configurations are advised for Star Wars Jedi Fallen Order’s proper operation. You need to have the following:
Minimum Requirements
| OS | Windows 7/8 64-bit |
| Processor | Intel Core i3 | AMD FX-6100 |
| Memory | 8 GB RAM |
| GPU | AMD Radeon HD 7750 | NVIDIA GeForce GTX 650 |
| Free Disk Space | 55 GB |
| Video Memory | 1024 MB |
Recommended Requirements
| OS | Windows 10 64-bit |
| Processor | Intel Core i7-6700K | AMD Ryzen 7 1700 |
| Memory | 8 GB RAM |
| GPU | AMD RX Vega 56 | NVIDIA GTX 1070 |
| Free Disk Space | 55 GB |
| Video Memory | 8192 MB |
Solutions to Lag, Fps Drops, Crashes and Freezes
Fixing the Star Wars Jedi Fallen Order stuttering, lags and freezing problems is a bit complex because they depend on a variety of variables, including PC hardware, the game’s display resolution, the maximum number of frames per second (FPS), incompatible third-party apps and more. As a result, we advise you to use every technique until the issue is resolved or minimized. Numerous issues can be quickly resolved by altering the in-game graphics settings or keeping them low.
This list may include the game’s screen resolution, in-game texture resolution, shadow resolution, top frame rate, number of displayed characters or other visual effects requiring more graphics or memory. You can try the steps listed below to reduce the Star Wars Jedi Fallen Order stuttering, lags and freezing issues to some extent, depending on FPS, resolution and quality settings in game.
1. Launch Options
- First, launch your Steam client and navigate to Library
- Next, right-click on Star Wars Jedi: Fallen Order
- Click on Properties
- You’ll discover Launch Options on the General tab
- Enter this in the launch options “-fullscreen” (The engine is forced to start in fullscreen mode).
2. Graphics Drivers Update
- Right-click on the Start Menu
- Then, click on Device Manager located on the list
- After that, double-click the Display Adapters category to enlarge the list
- Next, right-click on the specific GPU and select Update driver
- Select Find drivers automatically
- The most recent version will be downloaded and installed immediately if an update is available
- Finally, reboot your computer for the change to take effect.
3. Administrative Mode
To avoid the Star Wars Jedi Fallen Order stuttering, lags and freezing issues, run the game’s exe file as an administrator. The Steam client should also be run as an administrator on your computer for best results. For this:
- Right-click the Star Wars Jedi Fallen Order exe shortcut file on your computer
- Choose Properties now and select the Tab for Compatibility
- Check the box next to ‘Run this program as an administrator’
- To save changes, choose Apply and then click OK.
4. Set High Priority
To instruct your Windows operating system to run the game properly, prioritize your game in the higher segment in Task Manager. For this:
- Press right-click on the Start Menu and choose Task Manager
- Then, click on the Processes tab
- Press “right-click” to select the Star Wars: Jedi Fallen Order game task
- Choose ‘Set Priority to High’ and then close Task Manager
- Run the Star Wars Jedi Fallen Order game afterward to look for any problems
5. Verify Integrity
Use this method to quickly identify if the Star Wars Jedi Fallen Order stuttering, lags and freezing issues is occurring due to corrupted or missing game files. To do so:
Verify Game Files on Steam:
- Open Steam and select Library
- Select Star Wars Jedi Fallen Order from the list of installed games with a right click.
- Now select Properties and access Local Files
- Choose Verify Integrity of Game Files
- Wait until the procedure is finished and restart your computer once you’re done
6. GPU Settings
To determine whether the Star Wars Jedi Fallen Order stuttering, lags and freezing issues has been resolved or not, make sure to alter the graphics card settings on the computer by following the given suggestions below:-
AMD:
- Monitor Tech – G-Sync
- Maximum Pre-rendered frames: 2
- Threaded optimization – On
- Power Management – Prefer Maximum Performance
- Texture Filtering Quality – Performance
Nvidia:
- First, Press right-click on the desktop
- Then, click on Nvidia Control Panel
- After that, click on Manage 3D Settings
- Now, select Program Settings
- Locate ‘Star Wars Jedi Fallen Order’ or manually connect the game if it’s not there on the list:
- Technology for the monitor: G-Sync
- Maximum Pre-rendered frames: 2
- Threaded optimization: On
- Power Management: Prefer Maximum Performance
- Texture Filtering – Quality: Performance
7. Turn Off Fullscreen Optimizations
DPI settings and full-screen optimization are included with Windows by default. You could try turning it off by following the steps below:-
- Find the Star Wars Jedi Fallen Order directory or installation folder
- Locate the Star Wars Jedi Fallen Order exe file and right-click on it
- Choose Properties and select the Tab for Compatibility
- Choose “Disable Full-Screen Optimizations”
- To proceed, select “Change high DPI setting”
- Tick the checkbox “Override high DPI scaling”
- The drop-down menu should contain the option “Application”
- Click Apply and then OK
8. Update The Game
Follow the instructions below to check for updates and install the most recent patch (if available). Here is how to do it:-
Steam:
- Open the Steam client and go to Library
- Select Star Wars Jedi: Fallen Order in the left menu
- The most recent update will be sought out automatically. Do not forget to click Update if there is a new update available
- The update installation process might take some time
- After completing it, quit Steam
- Restart your computer to apply the changes
Epic Launcher:
- Launch the Epic Launcher program and enter the library
- Go to the left pane and search for Star Wars Jedi Fallen Order
- Your Star Wars application requires you to click the three-dot icon
- To get a new update installation carried out automatically, check the auto-update.
- It will search for any recent update on it’s own. Do not forget to click Update if there is a new update available.
- Lastly, restart your computer to apply the changes, then try launching the game once more.
-
Windows Game Mode
If you have the Game Mode enabled, according to Windows, running game mode helps optimize various windows processes, updates and other items. But this isn’t factually true. The game bar has been known for causing the Star Wars Jedi Fallen Order stuttering, lags and freezing issues. Nvidia’s ShadowPlay is superior for recording game clips, so disabling it when not in use is better.
- Click on Start
- Then head to Settings → Gaming
- Deselect “Record using Game bar”
- Go to the Captures tab and turn off “Record the background while I’m playing a game”
- Finally, select the Game Mode tab and disable it.
-
Turn Down The Game Settings
The general rule of thumb for the Star Wars Jedi Fallen Order stuttering, lags and freezing issues, is that you should always reduce the in game settings. Turning down shadows and textures should help, so fiddle around with the settings a little.
Closing Thoughts
That concludes our article on how to fix the Star Wars Jedi Fallen Order stuttering, lags and freezing issues. Follow the above-mentioned steps. If even after following the aforementioned steps, if you continue to face the same problem, you can go to their official website and receive extra solutions.
Experiencing difficulties with your Device, check out our “How To” page on how to resolve some of these issues.
