There are several benefits of switching from a wired to a wireless keyboard. It can feel a bit tricky at first, but you will also experience convenience afterward. So, if you have got a new Logitech keyboard and want to connect it to your PC, go through this complete article, as here we have mentioned how to connect the Logitech Keyboard without any issues.
With wired keyboards, a person needs to insert the USB or PS/2 or any other cable into the computer before using the keyboard. On the other hand, when you are using a wireless keyboard, the process is quite different. Remember that the process of pairing a Logitech keyboard can vary depending on the model you are using. Today, we will discuss how to connect a Logitech keyboard and also provide you with insights on the matter.
Why use a wireless keyboard for a PC?
If you are done with the tangled wires of your keyboard, you can choose a wireless keyboard for your PC to have a seamless experience. This technology offers convenience and freedom as well.
- It helps users to avoid desk clutter
- It increases the distance between your eyes and the computer screen to keep your eyes safe
- It is portable and can be used anywhere in the house
- You don’t have to be completely dependent on the keyboard with your computer
How to connect Logitech keyboard
Most Logitech keyboards on the market come with a unifying receiver. It is a specially designed dongle that can easily connect your Logitech keyboard as well as some other Logitech devices. However, the Logitech unifying software should be downloaded on your computer for the process. It is always advised to keep your keyboard closer to your PC even if you are using a Logitech keyboard.
The pairing process of almost every Logitech keyboard is more or less the same. Here we have mentioned the steps below that you can follow.
Note– We have used the Logitech K230 model in this article to describe the step-by-step process.
Check OS Compatibility
Before doing anything else, you will need to check the OS compatibility of your keyboard. Remember that every model is compatible with certain operating systems, and if your keyboard is not compatible with the OS you are using on your computer, the keyboard cannot run on your computer.
The Logitech K230 model is compatible with Windows, Chrome OS, and Linux. There are also some other Logitech models that can be compatible with Mac OS, iOS, and Android. You have to understand your preferences well and you need to check whether the Logitech model is perfect for your operating system or not.
You can check which operating system your model supports from the package box or on the internet.
Insert Batteries
Batteries are extremely important for your keyboard as you cannot operate your keyboard without batteries. The location where you need to insert the battery can vary depending on your model. For most Logitech models, the battery holder is on the back side of the device. Logitech K230 has a battery holder on the front left side of the device.
Once you are done finding the battery holder for your keyboard, you will need to find out whether your keyboard supports AA or AAA batteries.
To insert new batteries or to replace the old ones:-
- You’ll need to remove the battery cover. With Logitech k230, you need to press the cover and slide it downwards to open it. The process of removing the cover can change depending on the device or model you are using.
- Now, set the first battery in a way that it’s positive end can properly match the positive side of the battery holder.
- Do the same with the negative end.
- Once you are done inserting batteries in both ports, close the battery cover.
- If you are using Logitech K230, place the cover properly and push it upwards to close it.
Note– Some wireless Logitech keyboards come with rechargeable batteries. These batteries can be charged easily using a USB-C or USB-B charger, depending on the device’s charging port.
Connect Logitech Unifying Receiver to Your PC
- In the next step, you need to use the unifying receiver on your keyboard. On most Logitech models, it can be found near the batteries. Talking about Logitech K230, you can find the dongle holder at the right side of the keyboard.
- Now, unplug the receiver and insert that into one of the empty USB ports you have on your computer.
Note– If you have mistakenly lost the unifying receiver of your model, you can use another Logitech device that properly supports it. Make sure to have the Logitech Unifying Software to get assistance with adding or removing the devices. It will allow you to disconnect your wireless keyboard from the old receiver and connect to the new one without any hazards.
If your unifying receiver is somehow unable to detect your device, here we have mentioned how you can fix the issue on Windows 10 or 11. Follow the steps mentioned below to fix it:-
- First, turn on your keyboard using the switch that will allow you to do so. On some models, you will have a power button, but when we are talking about the K230, you will need to do that by using the slider. You’ll easily find the power slider an the bottom part of the device. Some devices can also have it on the front face of the keyboard.
- Now, slide down the slider or slide it sidewise. If you are using a model with a power button, turn on your keyboard using that.
- Now, check whether your device is successfully paired or not.
Launch the text editor just like the notepad and start typing anything. If you can see what you are inputting from your keyboard on your computer screen, it means that the keyboard is successfully set up, and you’re done.
Steps To Pair a Bluetooth Logitech Keyboard?
Bluetooth is always one of the best options to connect wireless devices. If you are using a Logitech unifying receiver, you will need to take care of the dongle and buy a new one if you lose it anyhow. This is not a problem with a Bluetooth Logitech keyboard. With these devices, you can seamlessly pair your device without any additional tools. However, there are a few settings that you need to configure to pair your bluetooth keyboard with your PC.
Before you start the pairing process, turn on your keyboard by following the steps we have mentioned above. Also, make sure to check whether your operating system is compatible with your keyboard or not. Remember that your keyboard should have enough charge before you start connecting that.
Once you are done ensuring all the points mentioned above, follow the steps below to connect a Logitech keyboard using bluetooth.
Step 1: Turn on Keyboard Bluetooth
- Once you are done turning on your keyboard by following the steps mentioned above, the next step is to enable Bluetooth on the device. There is a dedicated button for that purpose.
- You need to hold the Bluetooth button for a few seconds until you can see the LED blinking continuously. It indicates that your keyboard is now in pairing mode and you can pair your PC with it.
Step 2: Configure & Pair your Keyboard to Your PC
- Once you have turned on the Bluetooth of your keyboard, turn on the Bluetooth of your computer.
- Next, connect it to your Logitech keyboard Bluetooth.
Remember that different operating systems can have different configurations. The configuration of Linux and Chrome OS is mostly similar to the configuration of Windows. On the other hand, the configuration of iOS is usually similar to Mac OS. Here we have discussed Mac OS and Windows as examples:-
On Windows
To pair the Bluetooth on your Windows OS, follow the below steps:-
For Windows 11
- First, press the Windows + I keys and open the settings
- Now, go to the bluetooth and devices option
- Next, turn on the Bluetooth option
- Here, tap on the add device button
- Now, select Bluetooth and wait until your PC discovers the new Bluetooth device for your keyboard
- Once you can see your keyboard model under discovered devices, choose it and wait a few moments for it to pair
- Now, press Done and check whether your Logitech keyboard is working properly or not
On Mac
Here are the steps to turn on the Bluetooth on your Mac OS and pair it with your keyboard.
- First, launch Bluetooth settings from the system preferences option
- Now, find and choose the Bluetooth option
- Go to the left panel and click on the turn bluetooth on option
- Once the Bluetooth of your Mac OS is enabled, it will automatically start scanning for new devices
- Now, find your keyboard model and click on connect
- Once your keyboard is properly paired, you will see the keyboard setup assistant dialog box on your screen
- Here, type the code shown on the screen or simply use the keys to ensure that your keyboard is working properly on your Mac OS
So, that’s it. Here we have thoroughly discussed how to connect the Logitech keyboard to your PC. Hope this article was helpful to you.
Experiencing difficulties with your Device, check out our “How To” page on how to resolve some of these issues.
