PS4 Controller Won't Charge

The DualShock 4 controller is used with PlayStation wirelessly and on a cable connection, and it is supposed to charge while connected to a USB port. The battery in your PS4 Controller might need to be changed if it won’t set, but that’s only one of several potential solutions. We have a variety of quick remedies you may try on your own to fix PS4 Controller won’t charge issues before you throw away your Controller or bring it in for pricey repairs.

What prevents the PS4 Controller from charging?

There are a few possible reasons to look into if a PS4 controller won’t charge:-

Problem with the charging port: It could be caused by physical damage or by obstructions like debris. Cleaning out the port or just replacing it are fixes.

Problem with the charging cord: It can be due to the micro USB end being damaged or worn out, the cable itself being defective, or the cable not being intended for this kind of use.

Problem with the PS4: Some faults can prohibit the console from charging your controllers. You might be able to resolve this by power cycling the console or the Controller, or you could charge the Controller with a different charger.

Problem with Hardware: Battery and charging port issues are the two most typical hardware issues with this kind of issue. Although both are pretty simple to replace, many users may feel comfortable hiring a professional.

Solutions To fix PS4 controller won’t charge issue:

A PS4 controller reset:

It is worth returning your PS4 Controller to it’s factory default settings before we start fiddling with your cable and batteries. Every PS4 Controller contains stored settings and configurations, often player preferences. We can try correctly resetting your PS4 Controller to see if that works.

Remove the PS4 Controller’s connection to the console and any charging ports.

Take a tiny pin, turn the Controller while pressing and holding the reset button on the back once it is disconnected. Keep holding the button down for few seconds.

Release the pin at this point, and then try to pair or charge your Controller after a little delay.

Controller charging port testing:

In some circumstances, it is likely that the PS4 Controller’s charging port is defective and needs replacement, preventing the Controller from being charged. All you need to do to verify this is attach a different controller to the PS4 charging port using the same USB cable you used to connect the first Controller, then see if it charges correctly. If the other controller charges without a problem, there must be a problem with the Controller’s charging port. You can try some more of the suggestions below, but if they don’t work, you’ll need to contact customer support to have a new charging port installed.

Switching off your PS4:

Your PS4 system could be experiencing an issue, which could blame your PS4 Controller for not charging as it should. Numerous users claimed that restarting the console fixes the problem. By totally continuing the console, all temporary configurations get removed. This process is known as power cycling.

Shut off your PS4 system and Controller

Remove the console’s primary power supply wire from the socket and leave it disconnected for five to ten minutes. Press+hold the power button of the PS4 for 30 seconds.

Reconnect everything after the allotted time, then switch on your console and Controller. See if connecting your Controller works by giving it a shot.

Check the connected wire:

The PS4 gets charged through a wire that resembles a micro USB device we use daily, much like any other electronic gadget. The wire may occasionally become damaged through use. Replace the wire, and then check to see if the controller charges. Ask someone you know might have a proper functioning and trouble-free working charging wire to double check. If it turns out that your cable is the problem, think about replacing it.

Changing the PS4’s Batteries:

After using each of the troubleshooting techniques, if you are still unable to resolve the issue, you should think about having your PS4 batteries changed. Batteries for PS4s also have a lifespan after which they begin to act strangely before dying. You may easily find online YouTube tutorials and follow their directions if you’re unsure how to replace your PS4 battery. To prevent physical hardware damage, make sure to use a battery that is compatible with the specifications of your PS4 Controller.

Identify AC Voltage:

If there are voltage fluctuations in your location, this problem may occur on your PS4. If there are any fluctuations in your region, wait until the power problem gets rectified. Your device may not receive the needed current and voltage, so it is best to check the Power rating with a multimeter. Average power ratings range from 120 to 240W. As a result, adhere to these instructions to measure AC voltage using a digital multimeter.

  • Adjust the dial to ṽ. It can be seen in some digital multimeters (DMMs). Set the range to the highest voltage setting and turn the dial if the voltage in the circuit is unknown.

A Quick Note: Almost all multimeters start in the Auto range mode. Based on the voltage present, a measuring range gets automatically chosen.

Firstly the black lead needs to be inserted into the COM connector.

Then insert red lead into the V jack. After it gets done, take out the leads in the opposite order—red first, then black.

Black lead first, then red, connect the test leads to the circuit.

Note that ac voltage lacks polarity.

Precaution: Avoid touching the lead tips with your fingers. Don’t let the suggestions speak to one another.

The measurements can be easily read on display. When finished, take out the black lead first, then the red.

Verify whether the voltage in the voltmeter is very low and below the device’s power rating or if it changes continuously.

If the voltage is indeed low, you will have to wait until it stabilizes.

Keep The Charging Port Clean:

If changing the charging cord doesn’t help, check the Controller’s charging port. When a USB Cable gets plugged in, does a USB cable feel secure or flimsy? If it’s unsecured, the port can get hurt. Look at the port after removing the cable. Is there a noticeable accumulation of dirt, grime, or anything else that might be obstructing the connection? In that case, you’ll need to clean the port. You can carry out this procedure independently, but be careful not to harm your Controller.

Quick Steps to clean your charging port:

You must exercise extreme caution because a controller’s charging port is quite delicate, and one risks damaging specific charging pins if you do. Therefore, in this step, we will carefully remove the accumulation of residue from our PS4 Controller’s charging port.

First, switch off the game console. Avoid accidentally pressing the power button to turn it on.

To remove any loose particles, use several brief blasts of water.

Use a microfiber cloth to clear the area surrounding the port of any last-minute debris.

Take a toothpick and wrap it in a tiny piece of lightly damp paper towel to see if anything is left there. Use it to clean the port’s interior carefully.

Allow the Controller to dry out. Before attempting to charge the Controller, make sure it is dry using a flashlight.

See if the problem gets resolved after cleaning the port.

Connect to a computer, laptop, or portable power source to charge:

In some cases, it might be that the PS4 will not be able to effectively deliver the charging that the controller needs, which will prevent the Controller from charging. You may essentially set the Controller by plugging it into a power bank, computer, or laptop since it uses a USB-type connection. Make sure you connect it to a high-quality gadget and keep an eye on it to ensure it doesn’t overheat. Once it is connected, verify that the Controller is charging properly.

Take the PS4 off a hot surface:

Check to make sure your PS4 Controller is not resting on a hot surface, as this could cause the problem with the Controller not charging. The controller sensors are usually located on the back of the device, and a wire connects it’s parts. If left on a hot surface while charging, it could melt. Therefore, be sure to place your Controller on an excellent surface while charging.

Charge Your PlayStation 4 Controller Backwards:

It seems a little absurd to charge it backwards. However, in a few uncommon instances, customers could fully charge their controllers by merely turning them upside down. There aren’t many reasons for this approach, and it only seems to work for specific individuals. It appears to be more of an angle issue, suggesting that the charging port on the Controller can only accept electricity at a particular angle. So plug in your PS4 remote, flip it over, and leave it there. Many PS4 players have found it helpful to restart their Controller’s charge.

Allow the PS4 Controller to cool:

You will experience the PS4 Controller won’t charge issue if the Controller becomes too hot from playing too much. Most electronic equipment are programmed not to operate above a certain temperature threshold, and charging generates additional heat. You can wrap your PS4 Controller in a plastic bag and freeze it for 10 to 15 minutes if it feels particularly hot. Try charging it after taking it out. Avoid freezing the PS4 Controller for more than 15 minutes at a time since it could damage it.

Purchase a PS4 charging station:

Your USB cord may not function properly if your PS4 Controller is not charging and seems dead. If your USB is to blame, we advise that you get a new PS charging station. By skipping the USB wire entirely, you may charge your PS4 Controller using the ports on the end of the Controller. It will cost you less and is more affordable than purchasing a new controller.

Final Verdict

Charging issues are the most common problems faced in these technologies, and people often apply not-so-valuable methods to fix this issue without researching solutions. Try these methods to fix the PS4 Controller won’t charge issue, and continue enjoying your PS4 gaming.

Experiencing difficulties with your Device, check out our “How To” page on how to resolve some of these issues.


Please enter your comment!
Please enter your name here